Bold mix
varnishes, paints, construction products

Specifications
Type of paintwork accessories
Application of paint coatings — inside, outside, universal
Packing, l — 0.5 l; 1 l
Surface type — metal, wooden

Purpose: For curing paint and varnish materials intended for priming and painting metal (including aluminum, duralumin, galvanized, steel) and plastic (fiberglass, polypropylene, ABS, etc.) surfaces. For curing varnishes for furniture.

Specifications
Type of paintwork primer
Application of paint coatings - inside, outside, universal
Packing, l 20
The base of the material is water-based
Surface type - metal

Features:
- Anti-corrosion
- Hot drying
- For exterior and interior work

Purpose: for industrial priming by dipping metal (steel) surfaces of radiators, equipment parts, tools and products for subsequent painting with powder paints.
Properties: the primer has anticorrosive properties. It is used only in complex coating with powder paints.

Specifications
Gloss level — matte
Type of paintwork enamel
Application of paint coatings — inside, outside, universal
Packing, l — 1 (0.9 kg), 2.4 (2 kg), 10 (10 kg)
The base of the material is organic
Surface type — wooden

Purpose: for protective and decorative painting of metal (metal structures, gates, fences, etc.), wooden (windows, doors, garden furniture, etc.) surfaces exposed to atmospheric influences, for painting indoors (except floors). The enamel is intended for domestic use only. It is not intended for painting highly absorbent surfaces, including those finished with gypsum-containing plasters or putties.

Features:
- enamel creates a weather-resistant decorative coating;
- has reliable protective properties, good hiding power;
- the formed coating is resistant to the effects of climatic factors and temperature changes, does not stimulate the growth and development of microflora.

Specifications
Gloss level — semi-matt, glossy, matte, semi-gloss
Type of paintwork
Application of paint coatings — inside, outside, universal
Packing, l — 1,3,5,11,20
The base of the material is water—based
Surface type — wooden

Purpose: for high-quality protective and decorative finishing of solid wood products used in atmospheric conditions (windows, doors, architraves, etc.) and indoors (windows, doors, window sill boards, architraves, lining, skirting boards and other interior elements (except floors).

Properties:

• forms a weather-resistant, quick-drying coating that protects wood from moisture and climatic factors.;
• colored varnish provides additional protection from UV radiation and allows you to get a finish for valuable wood species (the color saturation of the coating depends on the number of layers applied);
• It has good painting properties;
• It differs from traditional alkyd lacquers by the absence of a pungent odor;
• the dried coating does not stimulate the growth and development of microflora.

According to the degree of gloss, it is available in glossy, semi-gloss, matte and semi-matte versions.

Specifications
Gloss level — matte
Type of paintwork
Application of paint coatings — inside, outside, universal
Packing, l — 1L (1.4 kg), 3L (4.2 kg), 5L (7 kg), 11L (14 kg)
The base of the material is water—based
Surface type — mineral

Purpose: for finishing and weather protection of facades of buildings and structures, as well as indoor surfaces on concrete, brick, plastered, painted, plastered, plasterboard and other mineral surfaces during repair, construction and finishing works.

Properties:

• forms a smooth, high-cover, weather-resistant coating with good dirt and water repellent properties, vapor permeability (class V2) and water permeability (class W2), which ensures durability;
• It has high adhesion to the substrate, does not stimulate the growth and development of microflora;
• resistant to wet cleaning
• the predicted service life of the coating, subject to the application technology, is at least 10 years.

Specifications
Type of paintwork
Application of paint coatings — inside, outside, universal
Packing, l — 5L (5 kg), 11L (12 kg), 20L (20 kg)
The base of the material is water—based
Surface type — metal

Purpose: Water-dispersion acrylic paint on metal is intended for painting metal (steel, cast iron, galvanized, aluminum) surfaces of products (equipment, machinery, mechanisms, railway transport, fences, gates, etc.) operated in atmospheric conditions and indoors. It can be applied without prior priming.
Properties: forms a matte weather-resistant elastic coating, resistant to water, industrial oil, 3% sodium chloride solution.

Description:
Cement-lime dry mix for facade and interior work. The material is designed for leveling surfaces and preparing the base for subsequent finishing. It is supplied to the facility as a dry mix in 25 kg bags and can be used on walls in dry rooms, as well as on objects with temperature differences. Bases: concrete, brickwork, plaster. It is an elastic, water-resistant, temperature-resistant material with good vapor permeability and high strength.
Features
- resistance to temperature drop,
- water resistance,
- vapor permeability,
- elasticity,
- high strength,
- crack resistance,
- UV resistance

Packing - 25 kg
Silicate-silicone structural plaster for exterior and interior use.

Appointment:
It is used as a finishing coat for:
- insulation systems
- concrete surfaces
- plastered bases
- matte coatings based on dispersion paints with load-bearing capacity
- silicate coatings with load-bearing capacity
It is not suitable for surfaces with efflorescences, as well as for surfaces made of plastic or
wood.

Features:
- high vapor permeability
- excellent adhesion to the substrate
- high stability of color tone
- weather-resistant
- with protection against damage to the surface by mold fungi and algae

Packing: 25 kg

Purpose:
Polymer-mineral adhesive compound for the reinforced layer in light plaster insulation systems, during facade repair and decoration. It can be used for gluing thermal insulation boards made of expanded polystyrene and fire-fighting cuts made of mineral wool.

Features:
- non-flammable
- weather-resistant
- good plasticity
- crack-resistant
- vapor permeable
- high adhesion
- convenient application
- low consumption.

Putty for creating smooth finishing coatings up to 5 mm thick for facade and interior work. It stretches to zero, is water-resistant, has high vapor permeability and is easy to use. Low consumption and low cost of the material will allow you to putty efficiently and economically.

Appointment:
Putty for creating smooth finishing coatings up to 5 mm thick for exterior and interior work.

Features:
- stretches to zero
- waterproof
- has high vapor permeability
- weather-resistant
- low consumption
- easy to use

Packing: 310 ml

Appointment:
One-component 100% silicone highly elastic acid-cured sanitary sealant with fungicidal additives for the installation of butt joints in rooms with high humidity conditions, such as bathrooms, showers, washrooms, laundries, etc. For sealing corner and expansion joints in structures subjected to mechanical and/ or thermal deformations. It forms a durable and at the same time highly elastic seam that can withstand deformation up to 230% and prevents moisture penetration. It can be used on substrates exposed to high temperatures (underfloor heating).

Properties:
- highly elastic;
- resistant to mold and mildew formation
- tight seam – perfect result
- high resistance to contamination
- increased adhesion to the substrate

Packing: 80 л

Appointment:
It is used for sealing and thermal insulation of joints when installing windows, doors, window sills and slopes, as well as other joints, voids, cracks, holes, for installation and insulation of wiring, technical and engineering communications, connection and sealing of various building structures.

Features:
- Ambient temperature during use from -18°C to +35°C
- Has excellent adhesion to most building and finishing materials, including PVC
- The hardened foam is a semi-solid elastic polyurethane with a homogeneous fine-mesh structure, high moisture and heat resistance (from -60 °C to +90°C)
– Foam output from the cylinder is up to 80 liters
- The primary expansion of the foam is about 50%

Characteristic:
It is a medium-viscous two-component epoxy resin for transparent and translucent self-leveling floors. It is used to create a glossy finish coating on top of drawings and images. It is suitable for professional and independent work in domestic, office and technical premises. Due to its adhesion, the resin can be poured onto surfaces made of various materials: wood, stone, concrete, glass, tile, metal. Provides uniform, bubble-free coverage. The coating is resistant to increased loads and UV rays, does not turn yellow over the years, and has no unpleasant odor.

Purpose: manufacture of transparent polymer floors.
The set includes: 40 kg of resin + 20 kg of hardener.
Weight of the finished mixture: 60 kg
Viscosity: medium.
Filling layer thickness: recommended thickness for residential areas 2.5-3 mm
Ratio of resin and hardener: 2:1
Life time after mixing: 30-40 min.
Polymerization time: 24-36 hours.

Features: high-quality plasticization to help avoid cracking, high strength and hardness (Shore 85)
Tools for use: roller or notched trowel, needle roller, mixing tool.
Consumption: 3 kg per 1 sq.m. This package is enough for 20 sq.m. With a thinner layer, it is possible to form a matte film and poor gloss.

Mixing: before applying resin, it is necessary to prepare the surface before starting work (dust, degrease, dry). The resin and hardener must be mixed in a 2:1 ratio. Mixing and pouring of the components is recommended at a constant room temperature of at least 18 °C.

Application:
Waterproofing is two-component and its preparation takes place by mixing the liquid component B with the dry component A. After thorough mixing, which is better carried out with a drill and a special nozzle, the composition must be allowed to settle for 10 minutes, and then mixed again.

The surface intended for application must gain its full strength and be clean without substances that interfere with adhesion. Keep in mind that concrete and plaster bases sometimes take up to 30 days to gain their stated strength.

It is recommended to apply the composition with a poppy brush in a thick layer in one direction on a slightly moistened surface from the far corner towards the exit.
After 3 hours, you can start applying the second layer, but this time, you should use a metal grater as a tool, and the layer is laid perpendicular to the direction of the previous layer.

Complete drying occurs after 3-7 days, and up to this point it is worth protecting the coating from precipitation and operation.
Taking into account the fact that the waterproofing includes water, the work is performed only at a positive temperature, ranging from +5 to +25 ° C.

Packing: 15 l

Application:
The ready-to-use adhesive is designed for wallpaper and non-woven wallpaper, vinyl and heavy wallpaper up to 420 g/m2. After drying, the joint becomes transparent. Before you start wallpapering, you should read the recommendations of the wallpaper manufacturer. It can be used on lime-cement plasters and drywall indoors.

Purpose: gluing
Carrying out work: indoors
Scope of application: dry rooms
Wallpaper type: non-woven, fiberglass
Color: transparent (after drying)